2003-2012 Dodge Ram 3500 Drag Link
2003-2012 Dodge Ram 3500 Drag Link
2003-2012 Dodge Ram 3500 Drag Link
2003-2012 Dodge Ram 3500 Drag Link

2003-2012 Dodge Ram 3500 Drag Link

SKU: TF-DRGLK-0813

$550.00
/

Fitment:

  • 2008-2012 RAM 3500
  • 2008-2013 RAM 2500 and Power Wagon
  • ***2003-2007 RAM 2500, 3500, and Power Wagon
  • NOTE: Designed for our 0"-3" lift systems with up to 11" travel. We do not suggest running this with more than 3" of lift, or more than 11" travel from full stock bump, as with more lift and improper setup, heim joint failure is very possible.

***If you have a 2003-2007 truck, you must have the 2008-2013 OEM MOPAR steering upgrade for this part to fit.

Details:

  • Made from 1.5” dia x .375” wall DOM and utilizing 7/8” shank FK Heim Joints and machined 17-4 stainless steel taper studs allowing high deflection angles
  • The Thuren Drag Link is a bit more tedious to adjust compared to the stock unit, but lasts much longer and is much stronger
  • Supplied with Crowfoot Wrench.
  • Machined flats on the main bar.

Included:

  • Assembled Drag Link (x1)
  • Taper Studs (x2)
  • Applicable Hardware

 

 

        Customer Reviews

        Based on 2 reviews
        100%
        (2)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        L
        Luke Milich
        Drag link on a 2007

        Have the updated 'o8 steering linkage but needed to replace one of the ball ends. Went to this Thuren unit instead of stock and am very happy with it. Steering is noticeably tighter and the fabrication was good (as expected). It is heavier duty than stock and I have always preferred Heim joints to ball joints anyways. Thanks again!

        R
        Robert Scott
        Thuren 08 Ram 2500 drag link

        I purchased this drag link to replace the heavy duty OEM drag link which has some built in vertical movement. This link is Beefy! I couldn't move the spherical joints by hand as they are very tight! Install was a easy. Keep in mind you loose the ease of steering wheel adjustment without the left/right thread OEM style adjuster.
        But this simplifies the assembly as a whole. Lastly the tapered studs are perfect fits for the heim joints and are one piece. This was installed on a 08 quadcab w custom King/Carli 3.0 2" low ride set up.