2003-2013 Dodge Ram 2500 Front Track Bar
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Heim End
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Delrin End
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Delrin Bushing and Center Pin
Thuren Fabrication RSMX12T Track Bar Heim Joint img 4
2003-2013 Dodge Ram 2500 Front Track Bar
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Heim End
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Delrin End
Image of Thuren Fabrication 2003-2013 Dodge Ram 2500 Front Track Bar Delrin Bushing and Center Pin
Thuren Fabrication RSMX12T Track Bar Heim Joint img 4

2003-2013 Dodge Ram 2500 Front Track Bar

SKU: TF-4LFTB-16MM

$410.00
/

If you are having any steering or handling issues, our Trackbar upgrade is the first place to start! Our Trackbar is designed to be very rigid, with as close to ZERO deflection as possible.

Often people will think that having a rigid track bar will give steering vibration and rattle, but this is simply not true, being that the Trackbar is the only support for the steering linkage. The less deflection in the Trackbar, the less deflection in the steering. Simple as that!

Fitment:

  • If you have a 2003-2007 truck, read the below bolt size note before ordering!!
Details:
  • Everything except the Heim Joint and hardware is manufactured in house from raw materials.
  • Includes our Tool Steel 33mm/1.28" Crowfoot Wrench
  • Made from 1.50"x3/8" wall 1026 DOM tube.
  • Delrin machined frame side bushing.
  • CNC machined form threaded Heim joint tube end.
  • Bead blast textured, then high quality Powder Coated.
  • Adjustable length (within spec)
  • Grease fitting for frame bushing.
  • Extreme duty FK Teflon lined rod end at axle side.
  • DOES NOT FUNCTION WITH LARGER AFTERMARKET DIFF COVERS!!!!!

Note: From 2003 to approximately 2007.5, these trucks used 14mm(shank size) bolts on both ends of the Trackbar. Then around the middle of 2007, some trucks were coming with a 14mm bolt on the frame side and a 16mm bolt on the axle side.

If you have a 2003-2007 truck and you're unsure if you have mismatched hardware, you should purchase the above 2008-2013 option with hardware included, and plan to possibly drill out the mounting flange(s) to a bigger 5/8"(16mm) hole.

Regardless, If you have a 2003-2007 truck, we highly recommend you upgrade to the 2008-2013 option with hardware included, as the 14mm OEM hardware is engineered too small in our opinion.

Included:

  • Assembled Trackbar (x1)
  • 33mm Crowfoot Tool (x1)

Replacement parts can be found here.

    Customer Reviews

    Based on 256 reviews
    95%
    (242)
    2%
    (5)
    1%
    (2)
    0%
    (0)
    3%
    (7)
    K
    KC
    Buy It!!!

    Stop thinking about it and just buy it, The track bar from Dodge and your local parts store are absolute garbage, spend the money and have peace of mind! My Suspension has never felt this tight at highway speeds.

    C
    Conrad Funke
    Great service, great products

    Thuren customer service and product quality is second to none.

    D
    David Palazzolo
    Great quality!

    The set up chart was very helpful! Everything went together great! Truck is really tight!!! Hopefully it stays that way for a good long time!!

    B
    Bryant LUcero

    Great experience and fast shipping.

    J
    Joe Zellers
    2003-2013 Dodge Ram 2500 Front Track Bar

    The bar is well made and installed easily. I had the 16mm bolts that egg-shaped on the frame side so drilling the existing holes to 18mm was the most work of the install. This bar made a huge difference in handling over the stock bar.